WEBVTT

00:00:00.000 --> 00:00:02.200
Replace front door decal

00:00:06.200 --> 00:00:10.150
Disassembly. 1. Clean the area around the decal. Allow to dry

00:00:13.150 --> 00:00:22.100
Disassembly. 2. Mark the position of the old sticker by placing a piece of masking tape at the top left, left side, and bottom edge of the old sticker on the door

00:00:28.200 --> 00:00:35.100
Disassembly. 3. Apply hot air over the sticker with a hair dryer for 30 seconds. Lift the edge of the sticker and slowly peel it off

00:00:45.150 --> 00:00:50.150
Assembly. 1. Clean the surface with the supplied wet wipe

00:00:59.150 --> 00:01:09.150
Assembly. 2. Remove the protective foil from the back of the decal starting on the left edge of the text. Do not peel completely in order to avoid touching the adhesive before applying

00:01:12.150 --> 00:01:19.150
Assembly. 3. Position the door decal on the door. Use the tape applied to line up the sticker correctly

00:01:22.150 --> 00:01:36.150
Assembly. 4. Use a plastic scraping tool to apply the decal slowly and carefully, beginning with the left edge of the text before going over the rest of the sticker, removing the remaining protective foil. Be careful not to scratch the paint

00:01:43.200 --> 00:01:50.150
Assembly. 5. Remove the top-layer assembly foil (with holes) and the masking tape. Clean the sticker assembly area on the door surface

00:01:54.150 --> 00:01:57.100
Repeat all steps on the other side