Using HomeLink®*
Use HomeLink® instead of the separate remote controls such as for the garage door or the alarm system.
Depress the programmed button.
The garage door, gate, alarm system or similar is activated (may take a few seconds).
The indicator lamp illuminates or flashes when the button has been depressed.
If the button is depressed for more than 20 seconds, the reprogramming is started.
The original remote controls can still be used in parallel with HomeLink®.
Note
HomeLink® cannot be used if the car is locked and the alarm is armed from the outside.
Warning
- If HomeLink® is used to control a garage door or gate, ensure that nobody is near the door or gate while it is in motion.
- Do not use HomeLink® for any garage door that does not have safety stop and safety reverse.
