Opening the bonnet

Opening the bonnet requires pulling two separate release levers and provides access to the front storage compartment. Be sure to close the bonnet again before driving the car.

Locations of release levers

Interior bonnet lever location — The first lever can be found below the dashboard on the driver's side, just in front of the door hinge.

Exterior bonnet lever location — The second lever is below the front edge of the bonnet.

Releasing the bonnet

Pull back the bonnet lever inside the car.

Directions on using the interior lever.

The bonnet releases from its fully locked position. It opens slightly, which gives you access to the second lever.

Pull the lever below the front edge of the bonnet.

Top view of the exterior lever. The bonnet has been removed in the illustration to help show the lever and how to pull it.

The bonnet releases fully.

Lift the bonnet by its front edge and open it to its fully extended height.

The bonnet stays in position.

Note

After closing the bonnet

If you see an open bonnet warning in the driver display, open the bonnet and check for obstructions before closing it again. Contact Polestar Customer Support if the notification doesn't go away.

Warning

Do not drive with the bonnet open

Stop the car immediately if there is any indication that the bonnet is not completely closed.

Entry and security