Adjusting One pedal drive
Braking by using One pedal drive can be adjusted, enabled or disabled in drive settings.
The available settings are:
| Standard | The function is on. You can brake by releasing the accelerator. |
| Low | When you ease up on the accelerator, the car will brake with less force than in the standard setting. |
| Off | The function is off. Releasing the accelerator does not engage the brakes. |
Warning
There is a limit to the braking force that can be applied by releasing the accelerator when using One pedal drive. For hard braking you need to use the brake pedal.
Press the car symbol 
in the bottom bar and go to Settings.
in the bottom bar and go to Settings.Go to .
Select a setting.
