Using the wireless charger
To use the wireless charger, your device must be compatible with the Qi wireless charging standard. Also make sure that wireless charging is enabled on both the device1 and on the charger itself. You can enable the charger in the centre display.
Warning
Important
Signal disturbances
The car uses electromagnetic fields, Bluetooth and UWB2 as well as NFC3. These signals may cause disturbances in other devices at certain distances. Make sure you are aware of what these issues may be. You can read more about different specifications in their separate sections in this manual.
NFC cards and charging
Avoid storing cards or keys with NFC near the wireless charger when using the charging function as this could damage them.
The device starts charging and the charging symbol appears in the centre display's status bar.
Warning
Note
- You may experience differing results when charging different devices. For example, the time it takes before charging starts and how quickly a device is fully charged.
- Your device might get hot during charging. This is normal and nothing to worry about. If the device's battery temperature becomes too high, charging is deactivated.
If the device doesn't charge
- Make sure you have enabled the charger in the centre display.
- Make sure there are no items on the charger apart from the device you want to charge.
- Lift the device and then place it back in the middle of the charger.
- Remove any cases or covers from the device.
