Specifications for fluids and lubricants

Filling washer fluid

Washer fluid is used for cleaning the headlamps and windscreen. Washer fluid with antifreeze must be used when the temperature is under the freezing point.

Air conditioning – specifications

The car's climate control system uses a freon-free refrigerant either R1234yf or R134a depending on market. Information about which refrigerant the car's climate control system uses is printed on a decal located on the inside of the bonnet.

Brake fluid – specifications

The medium in a hydraulic brake system is called brake fluid, and it is used to transfer pressure from e.g. a brake pedal via a master brake cylinder to one or more slave cylinders, which in turn act on a mechanical brake.

Transmission fluid – specifications

Under normal driving conditions, the transmission fluid does not need to be changed during the service life of the gearbox. However, it may be necessary in adverse driving conditions.

Fuel tank - volume

The fuel tank's filling capacity can be read in the table below.

Coolant – specifications

Prescribed grade: Ready-mixed coolant approved by Polestar. If concentrated coolant is used, mix with 50% water (of approved water quality, not salt water, etc.). Contact Polestar Customer Support if you are uncertain.

Adverse driving conditions for engine oil

Adverse driving conditions can lead to abnormally high oil temperature or oil consumption. Below are some examples of adverse driving conditions.

Engine oil – specifications

Engine oil grade and volume for each respective engine alternative can be read in the table.