Selecting the gear
Select a gear with the right-hand steering wheel stalk. The current gear is indicated on the instrument panel.
| R | Reverse |
| N | Neutral |
| D | Drive |
In addition to gear selection, the right-hand stalk also controls the parking brake.
You can only change gears when the vehicle is stationary or when you are driving at walking pace.
Press the brake pedal.
Move the stalk up or down to select a gear.
Your selection is indicated on the instrument panel.
Note
When moving the gear selector either up or down, you can feel that it has two positions in each direction. Select R by moving the gear selector all the way up. Move the selector all the way down to select D.
You can select the neutral gear, N, by moving the gear selector to the first position in either direction, and holding it there for a couple of seconds. The stalk always returns to its middle position between gear selections.